kernel

linux-6.8.1/drivers/net/ethernet/mellanox/mlxsw/Kconfig

@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Mellanox switch drivers configuration
+#
+
+config MLXSW_CORE
+	tristate "Mellanox Technologies Switch ASICs support"
+	select NET_DEVLINK
+	select MLXFW
+	select AUXILIARY_BUS
+	help
+	  This driver supports Mellanox Technologies Switch ASICs family.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_core.
+
+config MLXSW_CORE_HWMON
+	bool "HWMON support for Mellanox Technologies Switch ASICs"
+	depends on MLXSW_CORE && HWMON
+	depends on !(MLXSW_CORE=y && HWMON=m)
+	default y
+	help
+	  Say Y here if you want to expose HWMON interface on mlxsw devices.
+
+config MLXSW_CORE_THERMAL
+	bool "Thermal zone support for Mellanox Technologies Switch ASICs"
+	depends on MLXSW_CORE && THERMAL
+	default y
+	help
+	 Say Y here if you want to automatically control fans speed according
+	 ambient temperature reported by ASIC.
+
+config MLXSW_PCI
+	tristate "PCI bus implementation for Mellanox Technologies Switch ASICs"
+	depends on PCI && HAS_IOMEM && MLXSW_CORE
+	default m
+	help
+	  This is PCI bus implementation for Mellanox Technologies Switch ASICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_pci.
+
+config MLXSW_I2C
+	tristate "I2C bus implementation for Mellanox Technologies Switch ASICs"
+	depends on I2C && MLXSW_CORE
+	default m
+	help
+	  This is I2C bus implementation for Mellanox Technologies Switch ASICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_i2c.
+
+config MLXSW_SPECTRUM
+	tristate "Mellanox Technologies Spectrum family support"
+	depends on MLXSW_CORE && MLXSW_PCI && NET_SWITCHDEV && VLAN_8021Q
+	depends on PSAMPLE || PSAMPLE=n
+	depends on BRIDGE || BRIDGE=n
+	depends on IPV6 || IPV6=n
+	depends on NET_IPGRE || NET_IPGRE=n
+	depends on IPV6_GRE || IPV6_GRE=n
+	depends on VXLAN || VXLAN=n
+	depends on PTP_1588_CLOCK_OPTIONAL
+	select GENERIC_ALLOCATOR
+	select PARMAN
+	select OBJAGG
+	select NET_PTP_CLASSIFY if PTP_1588_CLOCK
+	default m
+	help
+	  This driver supports Mellanox Technologies
+	  Spectrum/Spectrum-2/Spectrum-3/Spectrum-4 Ethernet Switch ASICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_spectrum.
+
+config MLXSW_SPECTRUM_DCB
+	bool "Data Center Bridging (DCB) support"
+	depends on MLXSW_SPECTRUM && DCB
+	default y
+	help
+	  Say Y here if you want to use Data Center Bridging (DCB) in the
+	  driver.
+
+config MLXSW_MINIMAL
+	tristate "Mellanox Technologies minimal I2C support"
+	depends on MLXSW_CORE && MLXSW_I2C
+	default m
+	help
+	  This driver supports I2C access for Mellanox Technologies Switch
+	  ASICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mlxsw_minimal.