kernel

linux-6.8.1/include/linux/mfd/gsc.h

@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Gateworks Corporation
+ */
+#ifndef __LINUX_MFD_GSC_H_
+#define __LINUX_MFD_GSC_H_
+
+#include <linux/regmap.h>
+
+/* Device Addresses */
+#define GSC_MISC	0x20
+#define GSC_UPDATE	0x21
+#define GSC_GPIO	0x23
+#define GSC_HWMON	0x29
+#define GSC_EEPROM0	0x50
+#define GSC_EEPROM1	0x51
+#define GSC_EEPROM2	0x52
+#define GSC_EEPROM3	0x53
+#define GSC_RTC		0x68
+
+/* Register offsets */
+enum {
+	GSC_CTRL_0	= 0x00,
+	GSC_CTRL_1	= 0x01,
+	GSC_TIME	= 0x02,
+	GSC_TIME_ADD	= 0x06,
+	GSC_IRQ_STATUS	= 0x0A,
+	GSC_IRQ_ENABLE	= 0x0B,
+	GSC_FW_CRC	= 0x0C,
+	GSC_FW_VER	= 0x0E,
+	GSC_WP		= 0x0F,
+};
+
+/* Bit definitions */
+#define GSC_CTRL_0_PB_HARD_RESET	0
+#define GSC_CTRL_0_PB_CLEAR_SECURE_KEY	1
+#define GSC_CTRL_0_PB_SOFT_POWER_DOWN	2
+#define GSC_CTRL_0_PB_BOOT_ALTERNATE	3
+#define GSC_CTRL_0_PERFORM_CRC		4
+#define GSC_CTRL_0_TAMPER_DETECT	5
+#define GSC_CTRL_0_SWITCH_HOLD		6
+
+#define GSC_CTRL_1_SLEEP_ENABLE		0
+#define GSC_CTRL_1_SLEEP_ACTIVATE	1
+#define GSC_CTRL_1_SLEEP_ADD		2
+#define GSC_CTRL_1_SLEEP_NOWAKEPB	3
+#define GSC_CTRL_1_WDT_TIME		4
+#define GSC_CTRL_1_WDT_ENABLE		5
+#define GSC_CTRL_1_SWITCH_BOOT_ENABLE	6
+#define GSC_CTRL_1_SWITCH_BOOT_CLEAR	7
+
+#define GSC_IRQ_PB			0
+#define GSC_IRQ_KEY_ERASED		1
+#define GSC_IRQ_EEPROM_WP		2
+#define GSC_IRQ_RESV			3
+#define GSC_IRQ_GPIO			4
+#define GSC_IRQ_TAMPER			5
+#define GSC_IRQ_WDT_TIMEOUT		6
+#define GSC_IRQ_SWITCH_HOLD		7
+
+int gsc_read(void *context, unsigned int reg, unsigned int *val);
+int gsc_write(void *context, unsigned int reg, unsigned int val);
+
+struct gsc_dev {
+	struct device *dev;
+
+	struct i2c_client *i2c;		/* 0x20: interrupt controller, WDT */
+	struct i2c_client *i2c_hwmon;	/* 0x29: hwmon, fan controller */
+
+	struct regmap *regmap;
+
+	unsigned int fwver;
+	unsigned short fwcrc;
+};
+
+#endif /* __LINUX_MFD_GSC_H_ */