141 lines
3.2 KiB
YAML
141 lines
3.2 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: OmniVision OV5642 Image Sensor
|
|
|
|
maintainers:
|
|
- Fabio Estevam <festevam@gmail.com>
|
|
|
|
allOf:
|
|
- $ref: /schemas/media/video-interface-devices.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: ovti,ov5642
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
description: XCLK Input Clock
|
|
|
|
AVDD-supply:
|
|
description: Analog voltage supply, 2.8V.
|
|
|
|
DVDD-supply:
|
|
description: Digital core voltage supply, 1.5V.
|
|
|
|
DOVDD-supply:
|
|
description: Digital I/O voltage supply, 1.8V.
|
|
|
|
powerdown-gpios:
|
|
maxItems: 1
|
|
description: Reference to the GPIO connected to the powerdown pin, if any.
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: Reference to the GPIO connected to the reset pin, if any.
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
description: |
|
|
Video output port.
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
bus-type:
|
|
enum: [5, 6]
|
|
|
|
bus-width:
|
|
enum: [8, 10]
|
|
default: 10
|
|
|
|
data-shift:
|
|
enum: [0, 2]
|
|
default: 0
|
|
|
|
hsync-active:
|
|
enum: [0, 1]
|
|
default: 1
|
|
|
|
vsync-active:
|
|
enum: [0, 1]
|
|
default: 1
|
|
|
|
pclk-sample:
|
|
enum: [0, 1]
|
|
default: 1
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
bus-type:
|
|
const: 6
|
|
then:
|
|
properties:
|
|
hsync-active: false
|
|
vsync-active: false
|
|
|
|
- if:
|
|
properties:
|
|
bus-width:
|
|
const: 10
|
|
then:
|
|
properties:
|
|
data-shift:
|
|
const: 0
|
|
|
|
required:
|
|
- bus-type
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/media/video-interfaces.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
camera@3c {
|
|
compatible = "ovti,ov5642";
|
|
reg = <0x3c>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ov5642>;
|
|
clocks = <&clk_ext_camera>;
|
|
DOVDD-supply = <&vgen4_reg>;
|
|
AVDD-supply = <&vgen3_reg>;
|
|
DVDD-supply = <&vgen2_reg>;
|
|
powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
|
|
|
port {
|
|
ov5642_to_parallel: endpoint {
|
|
bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
|
|
remote-endpoint = <¶llel_from_ov5642>;
|
|
bus-width = <8>;
|
|
data-shift = <2>; /* lines 9:2 are used */
|
|
hsync-active = <0>;
|
|
vsync-active = <0>;
|
|
pclk-sample = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|