114 lines
2.5 KiB
YAML
114 lines
2.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/onnn,mt9m114.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: onsemi 1/6-inch 720p CMOS Digital Image Sensor
|
|
|
|
maintainers:
|
|
- Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
|
|
description: |-
|
|
The onsemi MT9M114 is a 1/6-inch 720p (1.26 Mp) CMOS digital image sensor
|
|
with an active pixel-array size of 1296H x 976V. It is programmable through
|
|
an I2C interface and outputs image data over a 8-bit parallel or 1-lane MIPI
|
|
CSI-2 connection.
|
|
|
|
properties:
|
|
compatible:
|
|
const: onnn,mt9m114
|
|
|
|
reg:
|
|
description: I2C device address
|
|
enum:
|
|
- 0x48
|
|
- 0x5d
|
|
|
|
clocks:
|
|
description: EXTCLK clock signal
|
|
maxItems: 1
|
|
|
|
vdd-supply:
|
|
description:
|
|
Core digital voltage supply, 1.8V
|
|
|
|
vddio-supply:
|
|
description:
|
|
I/O digital voltage supply, 1.8V or 2.8V
|
|
|
|
vaa-supply:
|
|
description:
|
|
Analog voltage supply, 2.8V
|
|
|
|
reset-gpios:
|
|
description: |-
|
|
Reference to the GPIO connected to the RESET_BAR pin, if any (active
|
|
low).
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
bus-type:
|
|
enum: [4, 5, 6]
|
|
|
|
link-frequencies: true
|
|
remote-endpoint: true
|
|
|
|
# The number and mapping of lanes (for CSI-2), and the bus width and
|
|
# signal polarities (for parallel and BT.656) are fixed and must not
|
|
# be specified.
|
|
|
|
required:
|
|
- bus-type
|
|
- link-frequencies
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- vdd-supply
|
|
- vddio-supply
|
|
- vaa-supply
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/media/video-interfaces.h>
|
|
|
|
i2c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sensor@48 {
|
|
compatible = "onnn,mt9m114";
|
|
reg = <0x48>;
|
|
|
|
clocks = <&clk24m 0>;
|
|
|
|
reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
|
|
|
|
vddio-supply = <®_cam_1v8>;
|
|
vdd-supply = <®_cam_1v8>;
|
|
vaa-supply = <®_2p8v>;
|
|
|
|
port {
|
|
endpoint {
|
|
bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
|
|
link-frequencies = /bits/ 64 <384000000>;
|
|
remote-endpoint = <&mipi_csi_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|